Product Description

Product Description

THE Element

The compressor element’s performance and tightness are ensured by its distinctive profile design.

The aviation impeller coating assures extended-expression overall performance.

Oil tank and pace-escalating gearbox are built-in.

Great efficiency, strength cost savings, and substantial trustworthiness are all characteristics of the created-in oil pump.

 

THE AIR Finish

The compressor air finish has a distinctive profile layout that ensures its efficiency and tightness.

The aviation impeller coating assures prolonged-time period performance.

The substance for the rotor is forged steel, which has higher toughness and hardness.

Cooling jackets are used on all sequence of air finishes.

Reusable seal produced of high-high quality steel.

THE ROTOR

Cooling sleeves ensure that rotor clearance is kept to a bare small at all moments.

Improve efficiency and dependability.

A higher-efficiency shaft seal decreases put on and eradicate the possibility of oil leakage.

THE COOLER

High warmth trade efficiency, thanks to an built-in water circulation design and style.

Switching is easy with the heat recovery module.

Movement channel developed-in, easy to use, and trusted.

THE AIR FILTER

A large-good quality consumption filter ensures a substantial degree of filtering.

High power effectiveness and process reliability.

Prolonged support lifestyle and intervals amongst upkeep.

 

THE Smart CONTROLLER

The advanced control technique allows for simultaneous compressor and after-treatment management.

No maintenance is required because the components and software program are made to be trustworthy. Several regional and distant communication possibilities are supported. A thorough evaluation of the unit’s operational position and historic data.
 

 

Merchandise Parameters

Model Maximum Functioning Force Capacity(Trend)* Installed Motor Power Cooling Method Noise Degree Air Outlet Pipe
Diameter
Dimension Weight
50hz
bar(g) psig mthree/min cfm kw hp dB(A) L W H kg
RF37-7VSD A(W) 7 102 3.-6.5 105.9-229.5 37 50 Air Cooling 70 DN50 2160 1450 2200 1850
Drinking water Cooling sixty three DN80 2180 1450 2200 1950
RF37-8VSD A(W) 8 116 2.8–6.4 98.8-226 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling sixty three DN80 2180 1450 2200 1950
RF37-10VSD A(W) 10 145 2.6-6.3 91.8-222.4 Air Cooling 70 DN50 2160 1450 2200 1850
H2o Cooling sixty three DN80 2180 1450 2200 1950
RF45-7VSD A(W) 7 102 4.5-7.seven 158.9-271.eight 45 60 Air Cooling 70 DN50 2160 1450 2200 2000
Drinking water Cooling sixty three DN80 2180 1450 2200 2100
RF45-8VSD A(W) 8 116 4.-6.five 141.2-229.5 Air Cooling 70 DN50 2160 1450 2200 2000
Drinking water Cooling 63 DN80 2180 1450 2200 2100
RF45-10VSD A(W) 10 145 3.5-6.8 123.6-240.one Air Cooling 70 DN50 2160 1450 2200 2000
H2o Cooling 63 DN80 2180 1450 2200 2100
RF55-7VSD A(W) 7 102 5.-9.six 176.5-339 55 75 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-8VSD A(W) 8 116 4.5-8.8 158.9-310.seven Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling sixty three DN80 2180 1450 2200 2100
RF55-10VSD A(W) 10 145 3.5-7.seven 123.6-271.9 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-7VSD A(W) 7 102 5.5-thirteen.five 194.2-476.seven 75 100 Air Cooling 70 DN50 2160 1450 2200 2000
H2o Cooling 63 DN80 2180 1450 2200 2100
RF75-8VSD A(W) 8 116 4.5-thirteen.three 158.9-469.six Air Cooling 70 DN50 2160 1450 2200 2000
Drinking water Cooling sixty three DN80 2180 1450 2200 2100
RF75-10VSD A(W) 10 145 4.4-12.1 155.3-427.three Air Cooling 70 DN50 2160 1450 2200 2000
Drinking water Cooling sixty three DN80 2180 1450 2200 2100
RF90-7VSD A(W) 7 102 5.2-16.two 183.6-572 90 120 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling sixty three DN80 2180 1450 2200 2200
RF90-8VSD A(W) 8 116 4.5-15.6 158.9-550.nine Air Cooling 70 DN50 2160 1450 2200 2000
H2o Cooling 63 DN80 2180 1450 2200 2200
RF90-10VSD A(W) 10 145 4.4-14.2 155.3-501.four Air Cooling 70 DN50 2160 1450 2200 2000
H2o Cooling sixty three DN80 2180 1450 2200 2200
RF110-7VSD A(W) 7 102 10.2-19.5 360.2-688.six 110 150 Air Cooling sixty nine DN80 4050 1650 2000 3700
H2o Cooling sixty seven DN80 2550 1650 2000 2700
RF110-8VSD A(W) 8 116 9.3-19.2 328.4-678 Air Cooling 69 DN80 4050 1650 2000 3700
Drinking water Cooling 67 DN80 2550 1650 2000 2700
RF110-10VSD A(W) 10 145 8.5-17.5 300.1-618 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling sixty seven DN80 2550 1650 2000 2700
RF132-7VSD A(W) 7 102 10.8-23.five 381.3-829.8 132 175 Air Cooling 70 DN80 4050 1650 2000 3700
Drinking water Cooling sixty seven DN80 2550 1650 2000 2800
RF132-8VSD A(W) 8 116 10.4-22.eight 367.2-805.1 Air Cooling 70 DN80 4050 1650 2000 3700
Drinking water Cooling 67 DN80 2550 1650 2000 2800
RF132-10VSD A(W) 10 145 9.9-twenty.five 349.6-723.9 Air Cooling 70 DN80 4050 1650 2000 3700
H2o Cooling sixty seven DN80 2550 1650 2000 2800
RF145-7VSD A(W) 7 102 11.2-23.9 395.5-844 145 195 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-8VSD A(W) 8 116 10.2-22.1 360.2-780.four Air Cooling 70 DN80 4050 1650 2000 3900
H2o Cooling sixty eight DN80 2550 1650 2000 3000
RF145-10VSD A(W) 10 145 9.8-twenty.5 346.-723.nine Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling sixty eight DN80 2550 1650 2000 3000
RF160-7VSD A(W) 7 102 12.1-28.5 427.3-1006.4 160 215 Air Cooling seventy four DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-8VSD A(W) 8 116 11.6-26.four 409.6-932.three Air Cooling seventy four DN80 5040 1650 2100 5400
Water Cooling seventy two DN80 3100 1650 2000 4000
RF160-10VSD A(W) 10 145 9.9-24.5 349.6-865.two Air Cooling seventy four DN80 5040 1650 2100 5400
Drinking water Cooling seventy two DN80 3100 1650 2000 4000
RF200-7VSD A(W) 7 102 16.5-36.1 582.6-1274.8 200 270 Air Cooling seventy six DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-8VSD A(W) 8 116 15.4-33.9 543.8-1197.1 Air Cooling 76 DN80 5040 1650 2100 5600
Drinking water Cooling 65 DN80 3100 1650 2000 4200
RF200-10VSD A(W) 10 145 15.-thirty.8 529.7-1087.six Air Cooling seventy six DN80 5040 1650 2100 5600
H2o Cooling sixty seven DN80 3100 1650 2000 4200
RF250-7VSD A(W) 7 102 21.1-45.2 745.1-1596.two 250 350 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling seventy four DN80 3100 1650 2000 4300
RF250-8VSD A(W) 8 116 19.2-43.4 678.-1532.6 Air Cooling 76 DN80 5040 1650 2100 5800
H2o Cooling 74 DN80 3100 1650 2000 4300
RF250-10VSD A(W) 10 145 18.5-38.eight 653.3-1370.two Air Cooling seventy six DN80 5040 1650 2100 5800
Drinking water Cooling seventy four DN80 3100 1650 2000 4300
RF275-7VSD A(W) 7 102 22.2-forty six.eight 783.9-1652.7 275 370 Air Cooling 76 DN80 5040 1650 2100 5900
H2o Cooling 74 DN80 3100 1650 2000 4400
RF275-8VSD A(W) 8 116 21.3-43.5 752.2-1536.one Air Cooling seventy six DN80 5040 1650 2100 5900
H2o Cooling 74 DN80 3100 1650 2000 4400
RF275-10VSD A(W) 10 145 20.1-41.five 709.8-1465.five Air Cooling seventy six DN80 5040 1650 2100 5900
Drinking water Cooling 74 DN80 3100 1650 2000 4400
RF315-7VSD A(W) 7 102 25.-53. 882.8-1871.6 315 420 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling sixty five DN80 3100 1650 2000 4400
RF315-8VSD A(W) 8 116 24.-51.5 847.5-1818.seven Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling sixty five DN80 3100 1650 2000 4400
RF315-10VSD A(W) 10 145 23.-forty nine.five 812.2-1748 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling sixty five DN80 3100 1650 2000 4400

Detailed Photos

 

To Be Negotiated 1 Piece
(Min. Order)

###

After-sales Service: on Line Support
Warranty: 1 Year
Lubrication Style: Oil-free
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Horizontal

###

Customization:

###

Model Maximum Working Pressure Capacity(FAD)* Installed Motor Power Cooling Method Noise Level Air Outlet Pipe
Diameter
Dimension Weight
50hz
bar(g) psig m3/min cfm kw hp dB(A) L W H kg
RF37-7VSD A(W) 7 102 3.0-6.5 105.9-229.5 37 50 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF37-8VSD A(W) 8 116 2.8–6.4 98.8-226 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF37-10VSD A(W) 10 145 2.6-6.3 91.8-222.4 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF45-7VSD A(W) 7 102 4.5-7.7 158.9-271.8 45 60 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF45-8VSD A(W) 8 116 4.0-6.5 141.2-229.5 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF45-10VSD A(W) 10 145 3.5-6.8 123.6-240.1 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-7VSD A(W) 7 102 5.0-9.6 176.5-339 55 75 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-8VSD A(W) 8 116 4.5-8.8 158.9-310.7 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-10VSD A(W) 10 145 3.5-7.7 123.6-271.9 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-7VSD A(W) 7 102 5.5-13.5 194.2-476.7 75 100 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-8VSD A(W) 8 116 4.5-13.3 158.9-469.6 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-10VSD A(W) 10 145 4.4-12.1 155.3-427.3 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF90-7VSD A(W) 7 102 5.2-16.2 183.6-572 90 120 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF90-8VSD A(W) 8 116 4.5-15.6 158.9-550.9 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF90-10VSD A(W) 10 145 4.4-14.2 155.3-501.4 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF110-7VSD A(W) 7 102 10.2-19.5 360.2-688.6 110 150 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF110-8VSD A(W) 8 116 9.3-19.2 328.4-678 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF110-10VSD A(W) 10 145 8.5-17.5 300.1-618 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF132-7VSD A(W) 7 102 10.8-23.5 381.3-829.8 132 175 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF132-8VSD A(W) 8 116 10.4-22.8 367.2-805.1 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF132-10VSD A(W) 10 145 9.9-20.5 349.6-723.9 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF145-7VSD A(W) 7 102 11.2-23.9 395.5-844 145 195 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-8VSD A(W) 8 116 10.2-22.1 360.2-780.4 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-10VSD A(W) 10 145 9.8-20.5 346.0-723.9 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF160-7VSD A(W) 7 102 12.1-28.5 427.3-1006.4 160 215 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-8VSD A(W) 8 116 11.6-26.4 409.6-932.3 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-10VSD A(W) 10 145 9.9-24.5 349.6-865.2 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF200-7VSD A(W) 7 102 16.5-36.1 582.6-1274.8 200 270 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-8VSD A(W) 8 116 15.4-33.9 543.8-1197.1 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-10VSD A(W) 10 145 15.0-30.8 529.7-1087.6 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 67 DN80 3100 1650 2000 4200
RF250-7VSD A(W) 7 102 21.1-45.2 745.1-1596.2 250 350 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF250-8VSD A(W) 8 116 19.2-43.4 678.0-1532.6 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF250-10VSD A(W) 10 145 18.5-38.8 653.3-1370.2 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF275-7VSD A(W) 7 102 22.2-46.8 783.9-1652.7 275 370 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF275-8VSD A(W) 8 116 21.3-43.5 752.2-1536.1 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF275-10VSD A(W) 10 145 20.1-41.5 709.8-1465.5 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF315-7VSD A(W) 7 102 25.0-53.0 882.8-1871.6 315 420 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
RF315-8VSD A(W) 8 116 24.0-51.5 847.5-1818.7 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
RF315-10VSD A(W) 10 145 23.0-49.5 812.2-1748 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
To Be Negotiated 1 Piece
(Min. Order)

###

After-sales Service: on Line Support
Warranty: 1 Year
Lubrication Style: Oil-free
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Horizontal

###

Customization:

###

Model Maximum Working Pressure Capacity(FAD)* Installed Motor Power Cooling Method Noise Level Air Outlet Pipe
Diameter
Dimension Weight
50hz
bar(g) psig m3/min cfm kw hp dB(A) L W H kg
RF37-7VSD A(W) 7 102 3.0-6.5 105.9-229.5 37 50 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF37-8VSD A(W) 8 116 2.8–6.4 98.8-226 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF37-10VSD A(W) 10 145 2.6-6.3 91.8-222.4 Air Cooling 70 DN50 2160 1450 2200 1850
Water Cooling 63 DN80 2180 1450 2200 1950
RF45-7VSD A(W) 7 102 4.5-7.7 158.9-271.8 45 60 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF45-8VSD A(W) 8 116 4.0-6.5 141.2-229.5 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF45-10VSD A(W) 10 145 3.5-6.8 123.6-240.1 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-7VSD A(W) 7 102 5.0-9.6 176.5-339 55 75 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-8VSD A(W) 8 116 4.5-8.8 158.9-310.7 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF55-10VSD A(W) 10 145 3.5-7.7 123.6-271.9 Air Cooling 70 DN50 2160 1450 2200 1900
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-7VSD A(W) 7 102 5.5-13.5 194.2-476.7 75 100 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-8VSD A(W) 8 116 4.5-13.3 158.9-469.6 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF75-10VSD A(W) 10 145 4.4-12.1 155.3-427.3 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2100
RF90-7VSD A(W) 7 102 5.2-16.2 183.6-572 90 120 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF90-8VSD A(W) 8 116 4.5-15.6 158.9-550.9 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF90-10VSD A(W) 10 145 4.4-14.2 155.3-501.4 Air Cooling 70 DN50 2160 1450 2200 2000
Water Cooling 63 DN80 2180 1450 2200 2200
RF110-7VSD A(W) 7 102 10.2-19.5 360.2-688.6 110 150 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF110-8VSD A(W) 8 116 9.3-19.2 328.4-678 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF110-10VSD A(W) 10 145 8.5-17.5 300.1-618 Air Cooling 69 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2700
RF132-7VSD A(W) 7 102 10.8-23.5 381.3-829.8 132 175 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF132-8VSD A(W) 8 116 10.4-22.8 367.2-805.1 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF132-10VSD A(W) 10 145 9.9-20.5 349.6-723.9 Air Cooling 70 DN80 4050 1650 2000 3700
Water Cooling 67 DN80 2550 1650 2000 2800
RF145-7VSD A(W) 7 102 11.2-23.9 395.5-844 145 195 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-8VSD A(W) 8 116 10.2-22.1 360.2-780.4 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF145-10VSD A(W) 10 145 9.8-20.5 346.0-723.9 Air Cooling 70 DN80 4050 1650 2000 3900
Water Cooling 68 DN80 2550 1650 2000 3000
RF160-7VSD A(W) 7 102 12.1-28.5 427.3-1006.4 160 215 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-8VSD A(W) 8 116 11.6-26.4 409.6-932.3 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF160-10VSD A(W) 10 145 9.9-24.5 349.6-865.2 Air Cooling 74 DN80 5040 1650 2100 5400
Water Cooling 72 DN80 3100 1650 2000 4000
RF200-7VSD A(W) 7 102 16.5-36.1 582.6-1274.8 200 270 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-8VSD A(W) 8 116 15.4-33.9 543.8-1197.1 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 65 DN80 3100 1650 2000 4200
RF200-10VSD A(W) 10 145 15.0-30.8 529.7-1087.6 Air Cooling 76 DN80 5040 1650 2100 5600
Water Cooling 67 DN80 3100 1650 2000 4200
RF250-7VSD A(W) 7 102 21.1-45.2 745.1-1596.2 250 350 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF250-8VSD A(W) 8 116 19.2-43.4 678.0-1532.6 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF250-10VSD A(W) 10 145 18.5-38.8 653.3-1370.2 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 74 DN80 3100 1650 2000 4300
RF275-7VSD A(W) 7 102 22.2-46.8 783.9-1652.7 275 370 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF275-8VSD A(W) 8 116 21.3-43.5 752.2-1536.1 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF275-10VSD A(W) 10 145 20.1-41.5 709.8-1465.5 Air Cooling 76 DN80 5040 1650 2100 5900
Water Cooling 74 DN80 3100 1650 2000 4400
RF315-7VSD A(W) 7 102 25.0-53.0 882.8-1871.6 315 420 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
RF315-8VSD A(W) 8 116 24.0-51.5 847.5-1818.7 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400
RF315-10VSD A(W) 10 145 23.0-49.5 812.2-1748 Air Cooling 76 DN80 5040 1650 2100 5800
Water Cooling 65 DN80 3100 1650 2000 4400

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Dry Oil-Free Screw Air Compressor Industrial Energy Saving Variable Speed Drive VSD     with Hot sellingChina Dry Oil-Free Screw Air Compressor Industrial Energy Saving Variable Speed Drive VSD     with Hot selling
editor by czh 2023-01-13

Carbon dioxide compressor

As one of the carbon dioxide compressor manufacturers, suppliers, and exporters of mechanical products, We offer carbon dioxide compressors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of carbon dioxide compressor.

Recent Posts